AV013 SAFIRA1 Circular Hostess Set
SAFIRA1 is a faithful, unbranded technical reconstruction of a recognised warm-sand and deep-red long-haul cabin uniform. It retains the tailored pinstripe jacket, four-pleat skirt, pillbox hat and chiffon scarf architecture while excluding airline logos, calligraphy and protected insignia. Commercial production using a client's exact colours, marks or retired garments requires written rights-holder approval.
Set components
- Warm-sand single-breasted pinstripe jacket with deep-red piping
- Coordinating knee-length skirt with four inverted kick pleats and deep-red inserts
- Cream easy-care blouse
- Deep-red leather belt
- Deep-red pillbox hat with ivory chiffon scarf
- Detachable identity and name-badge mounting points
- Shoes and handbag available as separate accessories
Primary material specification
- Jacket and skirt shell: 54% polyester, 44% wool, 2% elastane performance suiting, approximately 270 g/m²
- Suiting performance target: approximately 15% stretch and more than 60,000 Martindale abrasion cycles
- Jacket lining: 100% recycled polyester anti-static twill, approximately 70 g/m²
- Pocketing: 65% recycled polyester, 35% cotton, approximately 110 g/m²
- Blouse: 65% polyester, 35% cotton easy-care poplin, approximately 125 g/m²
- Kick-pleat inserts and piping: solution-dyed recycled polyester twill
- Hat shell: matching deep-red suiting with lightweight flexible crown support
- Scarf: recycled-polyester chiffon, approximately 45 g/m²
- Belt, shoes and handbag: traceable leather or high-performance recycled-content non-leather alternative
- Buttons: colour-matched recycled resin with spare-button recovery programme
Performance treatments
- Nano-scale stain-release and crease-recovery finish on jacket and skirt
- Anti-static lining system
- Moisture-management and easy-care finish on blouse
- Fluorine-free finishing option
- Colourfastness, abrasion, pilling, seam-slip and dimensional-stability testing required for approval
- EU REACH and supplier PFAS declarations required
Circular use of retired uniform textiles
- Retired garments must enter a controlled, documented collection stream with client authorization and secure removal of all identity elements.
- Intact, security-cleared panels can be repurposed into internal document sleeves, travel organizers or training accessories.
- Clean wool-polyester suiting can be mechanically opened into recovered fibre. A practical development starting point is 15% to 30% recovered uniform fibre blended with certified recycled polyester and new wool, subject to spinning and performance trials.
- Recovered fibre is best introduced first into non-visible reinforcement felts, interlinings, accessory fabrics or selected lining structures before being approved for the outer shell.
- Polyester linings, piping and chiffon can enter fibre-to-fibre recycling only after composition verification, trim removal and recycler acceptance.
- Mono-material polyester components are preferred for future editions because they improve chemical-recycling compatibility.
- Leather accessories can be repaired, component-harvested or converted into bonded-leather panels where local processing permits.
- Metal hardware, zips and buttons should be separated for conventional material recovery.
- Fibre origin, batch mass and final destination should be recorded through RFID or a Digital Product Passport.
- Recycled-content percentages must be verified through mass-balance records and supplier certification. Actual recovery yield cannot be stated until the retired garments are composition-tested.
Proposed circular edition
- Outer shell: performance wool-polyester-elastane suiting with an initial target of 15% mechanically recovered uniform fibre
- Lining: 100% recycled polyester, designed for disassembly
- Pocketing: recycled polyester and cotton blend
- Piping and pleat inserts: solution-dyed recycled polyester
- Chiffon scarf: recycled polyester
- Recovered textile felt: internal collar support, hat reinforcement and document-pocket stabilization
- Replaceable high-wear components: cuffs, underarm shields, pocket bags and belt loops
Colourways
- Reference: Warm Sand, Deep Red, Cream and Soft Gold hardware
- Circular Edition: Recovered Sand, Oxblood, Ivory and Brushed Brass
- European Alternative: Stone Taupe, Burgundy, Soft White and Brushed Nickel
Options
- Skirt or trouser issue
- Long-sleeve or short-sleeve blouse
- Flat, medium-heel or low-heel shoe options
- Recycled-content non-leather accessory package
- Women's and gender-neutral fit blocks
- RFID or Digital Product Passport identity label
- Client-controlled take-back and secure de-branding programme
₹ 0.00
₹ 0.00