AV002 RAYAN Flight Attendant Suit
RAYAN is a two-piece cabin-crew suit developed for premium onboard service and formal airport duties. Its deep walnut shadow weave coordinates with the wider aviation collection, while narrow peak lapels, a compact ticket pocket and controlled bronze stitching create a distinct male silhouette.
Set components
- Deep walnut-brown tailored jacket
- Matching straight-tapered trousers
- Ivory easy-care shirt
- Deep-wine striped necktie
The belt and footwear shown in the images are styling recommendations and are not included in the core garment set.
Design and functional features
- Single-breasted jacket with two-button closure
- Modern regular tailored fit
- Slim 70 mm peak lapels
- Soft structured shoulders and lightly shaped waist
- Deep-wine undercollar
- Muted-bronze 2 mm pick stitching along the outer lapel edge
- Upper welt chest pocket
- Two slanted lower flap pockets
- Small integrated right ticket pocket
- Four buttons at each sleeve
- Clean centre-back seam and double rear vents
- Tonal anti-static lining with deep-wine piping
- Secure zipped internal phone pocket
- Buttoned internal passport pocket
- Slim internal pen pocket
- Matching mid-rise flat-front trousers
- Extended waistband tab with concealed hook-and-bar closure
- Internal shirt-grip tape
- Two front slant pockets and two buttoned rear welt pockets
- Straight-tapered legs with plain hems and alteration allowance
- Ivory spread-collar shirt with concealed reinforcement at the collar and cuffs
- Deep-wine tie with sandstone stripes and muted-bronze keylines
Primary material specification
- Jacket and trousers: 54% polyester, 44% wool, 2% elastane, approximately 270 gsm
- Weave: compact tonal shadow herringbone with controlled low sheen
- Outer-fabric stretch target: approximately 15%
- Outer-fabric abrasion target: more than 60,000 Martindale rubs
- Outer-fabric finish: nano-scale stain and crease protection
- Outer-fabric performance: high stain resistance, shape retention and colour retention through approved care cycles
- Jacket lining: 100% recycled polyester anti-static stretch twill, approximately 70 gsm
- Sleeve lining: 100% recycled polyester anti-static stripe lining, approximately 65 gsm
- Pocketing: 65% recycled polyester, 35% cotton, approximately 110 gsm
- Shirt: 65% polyester, 35% cotton easy-care poplin, approximately 125 gsm
- Shirt finish: breathable moisture-management and crease-resistant finish
- Tie: 100% recycled polyester jacquard, approximately 150 gsm
- Tie interlining: recycled-polyester and wool blend, approximately 210 gsm
- Buttons: dark horn-effect recycled resin
- Closures: YKK-equivalent recycled-tape trouser zip and concealed metal hook-and-bar
- Sewing thread: high-tenacity polyester core-spun thread
- Care: professional dry clean for jacket and trousers; shirt and tie care according to approved accessory programme
Treatment and compliance requirements
- Nano-scale stain and crease-resistance treatment applied to the outer suiting
- Treatment must preserve air permeability, stretch, drape and low surface sheen
- Anti-static finish applied to jacket and sleeve linings
- Moisture-management finish applied to the shirt
- Colourfastness required to rubbing, perspiration, light and professional dry cleaning
- Finished fabric must be tested for pilling, seam slippage, abrasion and dimensional stability
- All chemical treatments must be declared against current EU REACH requirements
- PFAS status must be declared by the finishing mill before approval
- OEKO-TEX Standard 100 or equivalent certification available as a programme requirement
- Final performance approval requires benchmark testing, wearer trials and supplier certificates because proprietary finishing recipes are not fully published
Material and performance options
- Equivalent recycled-polyester and responsible-wool blend using the same performance targets
- Lightweight 220 to 240 gsm tropical wool blend for warm-climate operations
- Fluorine-free stain-repellent finish where required by procurement policy
- Enhanced odour-management treatment for long-haul duty cycles
- Concealed stretch panels beneath the jacket armholes
- Washable-tailoring construction subject to garment-level validation
- Replaceable underarm shields for extended garment service life
Colour directions
- Deep walnut, ivory, deep wine, sandstone and muted bronze
- Chocolate brown, pearl, aubergine and antique gold
- Warm charcoal, soft cream, dark petrol and brushed brass
- Espresso, warm stone, oxblood and muted copper
Final colour approval should be completed against physical lab dips under D65, aircraft cabin lighting and warm terminal lighting.
Configuration options
- Regular, slim and comfort fit blocks
- Jacket lengths in short, regular and long
- Lapel widths from 65 to 80 mm
- Peak or narrow notch lapel
- Functional or non-functional sleeve buttons
- Double or single rear vents
- Standard or expanded internal pocket layout
- Flat-front or single-pleat trousers
- Straight, tapered or comfort trouser legs
- Standard, short and long shirt proportions
- Long-sleeve or short-sleeve shirt
- Self-tie or breakaway safety necktie
- Custom tie stripe, lapel stitching and undercollar colours
- Embroidery, woven badge, heat-transfer identity or unbranded finish
- Optional RFID or Digital Product Passport carrier
- Indicative size range: EU 42 to 66, with short and long fittings subject to approved grading
Intended use
Cabin service, premium-cabin hosting, boarding, arrival duties, airport representation and formal aviation events.
₹ 0.00
₹ 0.00